Concrete cutting in Menlo Park CA - clean cuts planned around what's in the slab
Need a driveway section out, a trench through a slab or a doorway in a concrete wall? We plan each cut around what's inside.
Concrete cutting in Menlo Park, CA is saw work on concrete that's already in place, and it usually starts with a slab or wall that has to change. We cut through driveways, patios, floors and sidewalks, and we open doorways and windows in concrete or masonry walls. A cracked panel might be coming out ahead of a new concrete driveway, or a patio might need a straight edge before concrete patio construction can start.
The price moves with how thick the concrete is, how far we cut, whether it's a floor or a wall, how easy the spot is to reach and whether we scan it first. The schedule turns mostly on that scan and on any city permit for work near the street. Your own figure comes from the estimate I write on site.
What our concrete cutting work covers
- Sections, trenches and edges. We cut out sections for a repour, run trenches through garage floors for new lines, and square up edges left ragged by an earlier tear-out.
- Drawings before the saw. Before we cut, I ask for any drawings and talk with you about scanning, because a slab isn't always built the way the plans show.
- I come out, our crew cuts. I come out to look at the job and write the estimate myself, and I run the job on site while our crew does the cutting. We started this business in 2023.
- Licensed and fully insured. The state licensing board counts concrete sawing, breaking and coring as concrete related services work, so it's fair to ask any crew which state license class it holds.
What sends people to a concrete saw
| Problem | What it looks like | Usual fix |
|---|---|---|
| Cracked or sunken panel | What it looks like: One driveway or walkway section is broken, tipped or sitting low | Usual fix: Cut the panel out cleanly and replace it |
| New line under a slab | What it looks like: A drain, water or power line has to cross the floor | Usual fix: Cut a narrow trench, lay the line, patch it |
| Doorway in a solid wall | What it looks like: You want a door or window where there's only concrete | Usual fix: Cut a square opening sized from the drawings |
| Ragged edge from breaking | What it looks like: An old removal left a jagged, chipped edge new concrete can't meet | Usual fix: Saw a straight edge before the new pour |
Cut a section or remove it all
- One section out. Suits a driveway or patio with one cracked or sunken panel, so we saw it out along its joints, the grooves meant to guide cracks, and pour it back.
- A trench or opening. Suits a new line under a garage floor or a doorway in a wall, where the slab or wall stays and we take out only what the work needs.
- Cut up the whole slab. Suits a slab cracked across most panels or sitting low, because sawing it into pieces makes removal neater and leaves a clean start for a full replacement.
How we plan and run the cut
- Call or send the form. Tell us what needs cutting and send photos or any drawings you have, and we set a time for me to come out.
- I measure and write it up. I measure, check the thickness and where water will run, then write down in plain words what we'll cut before I put a price on it.
- Permits and the scan. We check what the office for your address asks for, handle any permit or help you with it, and book the scan if we've agreed on one.
- Cutting on weekdays. We cut between 8 a.m. and 6 p.m. on weekdays, when Menlo Park exempts construction noise from its limit. Its weekend window is for owners working themselves.
- Clean-up and walk-through. Our crew hauls off the cut pieces and vacuums up the wet slurry the saw leaves, then I walk the finished cut with you.
Keeping the concrete around the cut sound
A sawed edge comes out straight and square, so new concrete fits tight against it and the slab you're keeping doesn't take the beating it would from a breaker. What happens after that depends on what goes back in, which is why I check the base and where water runs before anything is poured against the cut.
We work for homeowners and property owners in Menlo Park and the cities around it, from San Mateo down to Cupertino and beyond, including Palo Alto and Redwood City. If a slab or wall needs opening up, call (650) 582-0556 or send the form to ask for an estimate.
Tell us what needs cutting
Send photos of the surface, where it sits on the property and any drawings. We reply within one business day and set a time for me to come measure.
(650) 582-0556- Free estimate at your property
- Written scope in plain words
- No obligation to go ahead
Concrete cutting questions
Which saw do I need to cut a concrete driveway or wall?
Driveways, floors, sidewalks and pavement are usually cut with a walk-behind saw running a large diamond blade, according to one concrete sawing company. Door and window openings in a wall have their own standard method, so I look at the surface at the estimate and plan the saw around it.
Should concrete be scanned before cutting it?
Yes, in most cases. One scanning company advises a scan before any cutting or drilling even when drawings exist, so ask whether a quote includes one. A field guide adds that any slab that might have tensioned steel cables inside should be treated as if it does until the drawings and a scan say otherwise.
Do I need a permit to cut concrete in Menlo Park?
Possibly, if any of the work is in the public right of way, where Menlo Park's Public Works issues encroachment permits. Its list names driveway and sidewalk replacement rather than cutting, so I check before we set a date. For that work the city also wants a Menlo Park business license and a state contractor's license.
Where does the water and slurry go when you cut concrete?
It goes where we agree with you before the saw starts. We cut wet, which cools the blade and keeps dust down but leaves a gray slurry that has to be vacuumed up or contained, because in San Mateo County cement wash that reaches a storm drain flows untreated into local creeks, the Bay and the ocean.